Các lệnh cơ bản dùng cho VPC trên EVE-NG/UNETLAB

• Đặt tên cho VPC

VPCS> set pcname PC001

• Đặt IP cho VPC với các thông tin:

            IP address: 192.168.0.10
            Subnet mask: 255.255.255.0
            Default gateway: 192.168.0.254

PC001> ip 192.168.0.10/24 192.168.0.254

Checking for duplicate address...
PC1 : 192.168.0.10 255.255.255.0 gateway 192.168.0.254

• Đặt IP cho VPC bằng DHCP

PC001> dhcp

DDORA IP 192.168.101.1/24 GW 192.168.101.254

• Lưu cấu hình

PC1> save

Saving startup configuration to startup.vpc
. done

• Ngắt kết nối telnet session

PC1> disconnect

PC1>
Good-bye

• Ping port 

IT_01> ping 192.168.100.12 -p 80

84 bytes from 192.168.100.12 icmp_seq=1 ttl=254 time=1.619 ms
84 bytes from 192.168.100.12 icmp_seq=2 ttl=254 time=1.901 ms
84 bytes from 192.168.100.12 icmp_seq=3 ttl=254 time=2.263 ms
84 bytes from 192.168.100.12 icmp_seq=4 ttl=254 time=2.086 ms
84 bytes from 192.168.100.12 icmp_seq=5 ttl=254 time=2.057 ms

• Ping port TCP

 IT_01> ping 192.168.100.12 -p 80 -3

Connect   80@192.168.100.12 seq=1 ttl=254 time=3.232 ms
SendData  80@192.168.100.12 seq=1 ttl=254 time=1.363 ms
Close     80@192.168.100.12 seq=1 ttl=254 time=3.288 ms
Connect   80@192.168.100.12 seq=2 ttl=254 time=3.181 ms
SendData  80@192.168.100.12 seq=2 ttl=254 time=2.415 ms
Close     80@192.168.100.12 seq=2 ttl=254 time=4.069 ms
Connect   80@192.168.100.12 seq=3 ttl=254 time=3.213 ms
SendData  80@192.168.100.12 seq=3 ttl=254 time=3.409 ms
Close     80@192.168.100.12 seq=3 ttl=254 time=4.858 ms
Connect   80@192.168.100.12 seq=4 ttl=254 time=3.161 ms
SendData  80@192.168.100.12 seq=4 ttl=254 time=3.227 ms
Close     80@192.168.100.12 seq=4 ttl=254 time=4.850 ms
Connect   80@192.168.100.12 seq=5 ttl=254 time=2.416 ms
SendData  80@192.168.100.12 seq=5 ttl=254 time=3.208 ms
Close     80@192.168.100.12 seq=5 ttl=254 time=3.296 ms